General Category => Frame, Tank, Seat, Controls, Etc => Topic started by: kartjockey on July 31, 2016, 12:03:55 PM

Title: Filler neck replacement
Post by: kartjockey on July 31, 2016, 12:03:55 PM

Hey Rick!   Here ya go.



http://www.fillernecksupply.com/steel-industrial-bayonet-filler-neck-2-28-o-d-x-1-25-tall-na2668/

Title: Re: Filler neck replacement
Post by: Ricks on July 31, 2016, 02:41:12 PM

Thanks Tom!

Title: Re: Filler neck replacement
Post by: kartjockey on August 27, 2017, 07:22:15 AM

I bought some of these necks recently.  Good price and they fit!  Fast delivery.  I also went to NAPA and bought a cap from there.  P/N 703-1220.   It had a flat spot right in the center.  No knurl.  Probably will return and have them pull another from the shelf.  When I was working for NAPA I know they were always  supply and demand minded as sometimes we would find Bosch brand items mixed in with their ignition line.  So maybe the same part number cap may have a different part in the box.

Title: Re: Filler neck replacement
Post by: Ricks on August 27, 2017, 07:52:54 AM

Tom, those are the ones I use.  None of the ones I have bought had knurling.  Wayne says the original cap was domed, did not have the center flat spot.


http://www.simplexservi-cycle.com/index.php?topic=1564.0

Title: Re: Filler neck replacement
Post by: kartjockey on August 27, 2017, 08:14:57 AM

I have that came along with the package when I got the Sportsman.  Those caps are domed with knurl.  I haven't ever paid close attention to whether they were knurled or not.